Project

Point-to-Point Wi-Fi Bridge to a Detached Barn

Location
New River Valley, VA
Project type
Residential

Installed a Ubiquiti point-to-point wireless bridge to extend reliable network connectivity from the main property out to a detached barn.

Point-to-Point Wi-Fi Bridge to a Detached Barn

The problem

What the customer needed

Extend the home network to a detached barn that was too far for a standard access point, delivering a fast, stable wired-quality link.

Challenges

  • The barn was beyond the reliable range of the existing exterior access point
  • An older exterior AP cable run needed to be cleaned up and concealed
  • The link had to be fast and stable enough for everyday use at the barn

The solution

Our approach

We tidied and concealed the existing exterior cabling in raceway, then aligned a Ubiquiti point-to-point bridge between the main building and the barn to carry the network across the gap, and tested throughput and latency to confirm a solid connection.

Work completed

  • Cleaned up the existing exterior access point cabling and concealed it in raceway
  • Installed a Ubiquiti point-to-point wireless bridge between the buildings
  • Extended the network to the detached barn
  • Tested the link, measuring roughly 100+ Mbps at about 10 ms latency

Systems & equipment

  • Point-to-Point
  • Barn Wi-Fi
  • Ubiquiti
  • Wi-Fi

The result

The detached barn gained a fast, stable network connection — measured at roughly 100+ Mbps and about 10 ms latency during testing — with the exterior cabling left clean and concealed.

Project photos

Ubiquiti point-to-point wireless bridge mounted under an eave
Point-to-point antenna mounted on a garage aimed at the detached building
Point-to-point wireless link spanning a rural property
Exterior network cabling concealed in raceway along a gable
Exterior raceway routing network cabling near a disconnect

Have a similar project in mind?

Tell us what you're trying to accomplish. We'll help you figure out the right approach.